Field installation, commissioning and training, Field maintenance and repair service, Engineers available to service machinery overseas
Used as iron ore concentration plant
under engineer's guidance
as per your demand
100 Set/Sets per Month
Packaging & Delivery
Standard containers, bare main machine, motors and small parts are packed in wooden cases
Qingdao,Tianjin,Shanghai or other port requested
We are mainly specialized in: 1.Stone crushing plant 2.Sand making plant 3.Powder Grinding plant 4.Ore beneficiation plant 5.Cement production plant
Introduction of Iron sand lab shaker table shaking table specification
1. Iron sand lab shaker table shaking table specification is a physical beneficiation equipment, it is mainly used for separating gold, silver, lead and zinc, tin, tantalum, niobium, and other rare metals and precious metal ore .
2.High enrichment ratio, good efficiency, simple operation, and it can get final concentrate and tailings at the same time.
3.Compared with the traditional process, it does not need agent, with high concentration ratio, high reduction ratio,low consumption, easy management ,and high performance/cost ratio.
Structure of Iron sand lab shaker table shaking table specification
1.Head Motion: The head motion is made of rugged construction and it requires minimum maintenance. Its internal mechanism is splash lubricated from an integral oil sump.
2.Decks: a.The decks are built of 16 mm zircon-reinforced fiberglass with fabricated steel frames at the bottom, which are easy to clean and requires little maintenance.
b.The specific gravity of fiberglass that is made into decks is one third of that of steel, while its strength reaches as high as 70% that of steel.
c.This fiberglass desks also has the characteristics of water-resistance and corrosion-resistance and it can hold the shape unchangeable at ±50°C.
3.Feed and Water Box: A wooden feed distributing box with hopper and a long water box are attached to the iron of the deck, giving a very even distribution of feed and water.
4.Base: A choice of ordinary type, groove steel support or big channel steel support is available.
Features of Iron sand lab shaker table shaking table specification
1. Fine water-resistance, chemical resistance, corrosion resistance, abrasion resistance, etc;
2. We can simplify the repair and painting process, which directly reduces the maintenance cost, greatly increases recovery rate, and prolongs the life. It is the preferred choice for mineral processing machine updating.
Advantages of Iron sand lab shaker table shaking table specification
1.Higher Recoveries & Concentrate Yield 2.Greater Feed Capacity, More Tonnage/Day 3.4-Models to choose from, both Diagonal deck and Rectangular deck design 4.Deck Construction with Highest Quality of Water proof Teak Marine Wood 5.Continuous and un-interrupted Feed Cycle, resulting in higher recovery, time saving and costs 6.Highest Quality Anti-friction Head Motion 7.Modern and efficient Anti-friction Head Motion mechanism, self-oiling and splash-proof 8.Highest Quality Material Fabrication 9.Lowest ownership cost 10.standard One-Year Warranty
Working Principle of Iron sand lab shaker table shaking table specification
Table concentrator consists of Head Motion, Decks, frame, Feed and Water Box. When operate table concentrator, the ore grains laminate surface and according to the proportion and granularity, and make the longitudinal motion and transversal motion along the bed surface, in function of the gravity, the crosswise running water momentum, the inertia and friction force from the reciprocation symmetry movement of bed surface. Therefore, the proportion and the granularity different ore grain assumes gradually along respective heading by A on the one hand to B on the other hand fan-shaped flows off, separately discharges from the ore concentrate end and the debris side different area, finally the material is divided into the ore concentrate, the middling and the debris.
Technical Parameters of Iron sand lab shaker table shaking table specification
Coarse ore Deck
Fine sand Deck
Three different kinds of decks are available
Beneficiation area (m2)
Transmission end width (mm)
Concentrate end width (mm)
Maximum feeding size (mm)
Feeding density (%)
Frequency of stroke (r/min)
Water consumption (t/h)
Groove shape of deck
Available Rectangular, Saw-tooth, Triangle
How to choose the right model of shaking table?
To Choosing the shaking table model according to the Max feeding size, the feeding amount and plant area.
Max feeding size <2mm, coarse sand deck shaking table
Max feeding size <0.5mm, fine sand deck shaking table
Max feeding size <0.1mm, slime deck shaking table
The smaller the feeding size is, the less feeding amount will be.
If the plant area is not enough, we can use double-decked shaking table.
Packaging & Shipping
Our Service and Payment Terms
1. We usually accept T/T, L/C;
2. T/T: 30% in advance as down payment, the balance before delivery;
3. We take pictures of finished products before delivery.
Ways of Packing
1.Sand blasting, coat with high quality paint;
2.Product wrap by PP-Bubble;
3.Load container, Spear Parts in wooden case.
1. By sea Freight;
3. We will remind you before boat arrival.
1.We have factories, NOT Dealer, we can give factory price.
All machineries from Henan Xingyang Mining Machinery Manufactory are made by our own fully equipped workshops with lower price,flexible design and high quality.
2. Full Services of XKJ
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments. 1.Select equipment model; 2.Design and manufacture products according to clients’ special requirement; 3.Train technical personnel for clients.
Services during the sales: Servant
1.Pre-check and accept products ahead of delivery; 2.Help clients to draft solving plans.
After-sale services: Faithfulness
Provide considerate services to minimize clients’ worries. 1.Assist clients to prepare for the first construction scheme; 2.Install and debug the equipment; 3.Train the first-line operators; 4. Examine the equipment; 5.Take initiative to eliminate the troubles rapidly; 6.Provide technical exchanging. 7.Revisit regularly for establishing long-term and friendly relationship.
Provide clients one-year warranty to make sure the machine work well. Have spare parts of our very machine in stock all the time which means the replacements can bu sent to you timely. Send every client a preferential quotation.
3.If you are new for this business, we can deliver professional technical services.
Thank you for your trust on our company and let's head for the successful future hand in hand. We can supply: 1)Spot inspection. 2)Design strong feasibility scheme for the whole production line. 3)Choose appropriate equipments based on your actual situation and keep the cost to minimum. 4)Train the operator.
We are dedicated to helping clients to achieve the following targets:
1.Lower cost per ton
2.Higher operational security and efficiency
3.Higher capacity utilization and productivity
4.Lower noise, lower consumption
5.Longer service life of the assembly
6.Meet the latest environmental standards
7.Promote the sustainable development of mining business
8.Optimize the utilization of outfit and personnel
Henan Xingyang Mining Machinery Manufactory, are professional mining machinery manufacturer,mainly produces four series of products, namely,crushing equipment,sand making equipment, powder grinding equipment and ore beneficiation equipment,which are widely used in various industries such as metallurgy, mine, chemistry, building material, coal, refractory and ceramics.
The sand making and stone crushing equipment include jaw crusher, impact crusher,hammer crusher,cone crusher,roller crusher, sand maker, vibrating screen, sand washer and belt conveyor is suitable for the construction of airport, railway, highway and ordinary road and large bridge, subsea tunnel, land tunnel and new high-rise building.
The whole set of ore beneficiation equipment including ball mill, magnetic separator, flotation machine, rotary kiln, classifier and dryer machine is suitable for separating nonferrous metal ores such as copper, lead, tungsten, molybdenum, gold, iron, silver and manganese and non-metallic ores such as fluorite, quartz stone and silica sand.
Workshop and Processing Equipment
In order to help you get a suitable machine and provide you a preferential quotation, Pls kindly provide the following information:
1. What’s the materials to process? 2. What’s the feature of the materials? Like density, moisture degree,input particle size and out put particle size. 3. What’s your capacity per hour? 4. What’s material for the machine? 5.What’s the machine you want to buy?A single machine or a production line.